Return To: Session ITERP1 - ITER EDA 1 (Thursday, 22
Prev Page: (ITERP1/20) Beryllium Interaction with Steam or Air in
Next Page: (ITERP1/23) The ITER Toroidal Field Model Coil (TFMC)

(ITERP1/21) ITER Central Solenoid Manufacturing R&D

   
R. Jay Jayakumar , H. Tsuji ¹, O. Ohsaki ², J. Wohlwend ³, E. Salpietro ⁴, R. Thome ⁵, D. B. Montgomery , J. Minervini , D. Gwinn , R. Randall , C. Y. Gung , W. Beck , R. Childs , B. Smith , T. Hrycaj , S. Shimamoto ⁶, T. Ando ¹, T. Hiyama ¹, Y. Takahashi ¹, H. Nakajima ¹, T. Kato ¹, M. Sugimoto ¹, T. Isono ¹, N. Koizumi ¹, K. Kawano ¹, K. Hamada ¹, M. Nozawa ¹, J. Harada ¹, T. Honda ¹, K. Matsui ¹, T. Ito ¹, A. Terasawa ¹, I. Watanabe ¹, K. Taneda ¹, S. Sekiguchi ¹, M. Oshikiri ¹, H. Hanawa ¹, S. Seki ¹, H. Wakabayashi ¹, K. Takano ¹, Y. Uno ¹, T. Nagashima ¹, M. Ohta ¹, T. Fujioka ², A. Ozaki ²,D. Paganini ³, P. Gertsch ³, B. Ohea ³, R. McCool ³, J. Dalessandro ³, L. Hawley ³, G. Miyata ³, N. Martovetsky ⁷, J. Zbasnik ⁷, R. Reed ⁸, G. Bevilacqua ⁴, K. Okuno ⁵, R. Vieira ⁵, N. Mitchell ⁵, D. Bessette ⁵, B. Stepanov ⁵, Z. Piec ⁵
 
Massachusetts Institute of Technology, Cambridge, MA, USA
¹ Japan Atomic Energy Research Institute, Naka-gun, Ibaraki-ken, Japan
² Toshiba Co., Keihin, Kanagawa-ken, Japan
³ Lockheed - Martin, San Diego, CA, USA
⁴ NET Team, Garching, Germany
⁵ ITER Joint Central Team, Naka JWS, Naka-gun, Ibaraki-ken, Japan
⁶ Tohoku University, Sendai, Miyagi-ken, Japan
⁷ Lawrence Livermore National Lab., Livermore, CA, USA
⁸ Cryogenic Materials Inc., Boulder, CO, USA

Abstract
The International Thermonuclear Experimental Reactor (ITER ) Engineering Design Activity (EDA) includes the development of high performance superconductors , high current joints between superconducting cables and insulating materials. Also in the EDA, the resulting products of this R&D are incorporated in a Central Solenoid Model Coil which utilizes full size conductors. The manufacturing of the model coil and components has led to the development of the design, materials, tooling and process which are fully applicable to the manufacture of the ITER relevant CS coil. The R&D is essentially complete and final stages of the CS Model Coil manufacturing are underway.

   

Read the full paper in PDF format.