Return To: Session FTP1 - Technology Developments
Prev Page: (FTP1/21) Liquid Lithium Experiments in CDX-U
Next Page: (FTP1/23) Development of a Large-scale Monoblock Divertor Mock-up

(FTP1/22) Operating Windows of Pebble Divertor

K. Matsuhiro¹⁾, M. Isobe¹⁾, Y. Ohtsuka¹⁾, Y. Ueda¹⁾, M. Nishikawa^1)
 
1) Graduate School of Engineering, Osaka University, Osaka, Japan

Abstract.  A marked feature of the pebble divertor is an effect by use of functional multi-layer coated pebble, which consists of a surface plasma facing layer, an intermediate tritium permeation barrier layer, and a kernel for heat removal. The dimensions, structure and the irradiation conditions of pebbles are the important issues for the development of the pebble divertor. From the view point of resistance of the induced thermal stress, the pebble is taken as small as possible in size. On the other hand, from the view point of the pumping performance, the suitable irradiation temperature range of the surface layer of pebble was estimated from the experiments and the numerical analysis. The pumping process enhanced by dynamic retention is available to extend the higher allowable irradiation temperature range from 900K to 1100K. As taking the temperature rise limitation due to pumping effect and the fractural strength due to the induced thermal stress limitation, it was found that the diameter of the pebble is possible to be 1-2 mm in about 20 MW/m² for the SiC kernel and 2-3 mm in less than 30 MW/m² for the graphite kernel.

Read the full paper in PDF format.