Return To: Session OV1 - Overviews 1 (Monday, 19 October)
Prev Page: (OV1/2) Physics of High Performance JET Plasmas in
Next Page: (OV1/4) Overview of the Large Helical Device project

(OV1/3) Results from the DIII-D Scientific Research Program

   
T. S. Taylor  for the DIII-D Team 
 
DIII-D National Fusion Facility, General Atomics, San Diego, California 92186-5608

Abstract
The DIII-D  research program is aimed at developing the scientific basis for advanced modes of operation which can enhance the commercial attractiveness of the tokamak as an energy producing system. Features that improve the attractiveness of the tokamak as a fusion power plant include: high power density (which demands high $\beta$), high ignition margin (high energy confinement time), and steady state operation with low recirculating power (high bootstrap fraction), as well as adequate divertor heat removal, particle and impurity control . This set of requirements emphasizes that the approach to improved performance must be an integrated approach, optimizing the plasma from the core, through the plasma edge and into the divertor. We have produced high performance ELMing H-mode plasmas with $\rm\beta_N H_{98y} \sim 6$ for $\rm 5 \tau_E (\sim 1 s)$ and demonstrated that core transport barriers  can be sustained for the length of the 5-s neutral beam pulse in L-mode  plasmas. We have demonstrated off-axis electron cyclotron current drive for the first time in a tokamak, discovering an efficiency above theoretical expectations. Edge stability studies have shown that the H-mode  edge pressure gradient is not limited by ballooning modes ; the self-consistent bootstrap provides second stable regime  access. Divertor experiments have provided a new understanding of convection and recombination in radiative divertors and have produced enhanced divertor radiation with scrape off layer plasma flows and impurity enrichment.

           

Read the full paper in PDF format.